CYCO pH Buffer 4.0 - Legana Plants Plus
CYCO pH Buffer 4.0 - Legana Plants Plus
CYCO pH Buffer 4.0 - Legana Plants Plus

CYCO pH Buffer 4.0

$10.00 $5.00
Size: 250ml
250ml

Product Information

The most common reasons for pH meter error is dry storage of the electrode and electrode contamination. These cause loss of accuracy, reduced performance and slower response times.

Avoid placing pH electrodes in harsh chemicals especially those of high concentration or extreme pH e.g. pH Up.  These can damage electrodes or increase the need for electrode maintenance.

Thoroughly clean the electrode after use and always store your pH meter with the cap firmly in place.

Frequency of meter calibration is crucial and will optimize your pH meter’s performance.

Calibration of pH Meters at pH 4.0
pH Buffer 4.0 @ 25° C  (77° F)
Based on international (APHA) standard formula

Directions of Use

Instructions

Rinse electrode in distilled water and gently shake off excess water. Immerse electrode in calibration solution 7.0 for at least 2 minutes then adjust so the meter reads 7.0. Finally, to ensure accuracy, repeat the procedure with calibration solution 4.0 adjusting so the meter reads 4.0.
To prevent contamination of this solution, decant a portion into a smaller container and discard once used.
Never place electrodes in the bottle. Use sparingly – add drops to nutrient solution a little at a time, stir the solution and continue to test pH levels.
Repeat application until desired pH level is achieved. The quantity required for pH adjustment will vary depending on the nutrient strength and the purity of your water.

Technical Specifications

Ingredients

Water, 1,2-Benzenedicarboxylic acid, monopotassium salt

Product reviews
Shipping & Return
Shipping cost is based on weight. Just add products to your cart and use the Shipping Calculator to see the shipping price.

We want you to be 100% satisfied with your purchase. Items can be returned or exchanged within 30 days of delivery.